Longevity FORCECUT 60i - Manual (Page 19)

Plasma Cutters www.LWELD.com
www.longevity-inc.com 15
Assembly of ForceCut 80i Plasma Cutter
Assemble the consumables as pictured above, and described below.
1. Insert the electrode.
2. Place the copper tip over the electrode ensuring that is seated flat.
3. Secure all parts into place by turning the ceramic cup clockwise until it is
snug. Do not over tighten.
4. If your unit comes with a torch spacer, you can properly attach it to your
torch.
5. Remember to properly secure all connections of the torch to the unit.
The torch consumables are now successfully assembled.