Loadstar Sensors nCounter User Manual
Page 3

nCounter User Guide • 3
Enter Part No., Part Name and Weight per Piece.
If you do not know the weight per piece, use the following steps to calculate it:
1. Select the correct units for the part.
2. Empty the scale and click
Tare
.
3. Place a known number of pieces on the scale. To get the most accurate weight per piece, especially for small parts,
you should place enough parts that weigh a total of at least 10% of the scale capacity, i.e. if you have a 50 lb scale
you should at least load the scale with 5 lb of parts.
4. Enter the number of pieces.
5. Click
Calculate Weight per Piece
.
The weight per piece is now automatically entered in the Weight per Piece field.
Click
OK
to save the part information and return to the Parts List Window.
The new part will now appear in the Parts List window. Click
Close
to close this window and return to the main window.
Click on the arrow next to the Part No. / Name field in the main window to select the desired part.
With no parts on the scale (only the weighing bowl) click
Tare
to zero out the scale. Then add parts and click
Count
to start
counting the parts.
Be sure to
Tare
the scale every time before taking readings.
Loadstar Sensors, Inc. •
www.loadstarsensors.com