Blaupunkt Frankfurt C70 - Manual (Page 35)

71
DEUTSCH
ENGLISH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
POR
TUGUÊS
Subout/subwoofer
Setting the frequency and level
for the subwoofer
You can set the frequency and amplifier level
for a connected subwoofer. The settings you
make depend on the hifi system in your car
and the power of your subwoofer. Experiment
to find your ideal setting.
➮
Press the AUD button
9
.
➮
Press the soft key
4
with the display
allocation “NEXT”.
➮
Press the soft key
4
with the display
allocation “SUB”.
➮
Press the or button
7
to select
between the frequencies “80 Hz” and
“100 Hz”.
➮
Set the desired amplifier level using the
or button
7
.
➮
Press the OK button
5
to return to the
previous menu level or the MENU but-
ton
8
to leave the menu altogether.
The settings are now stored.
High-pass filter
Setting the high-pass filter
If a subwoofer is connected to your car radio,
you can use a high-pass filter (HP-F) to sup-
press the output of lower frequencies through
the internal final amplifier and an external pre-
amplifier that may be connected. This filter
has five adjustment levels. The settings de-
pend on the unit installed in your car. Experi-
ment to find your ideal setting.
➮
Press the AUD button
9
.
➮
Press the soft key
4
with the display
allocation “NEXT”.
➮
Press the soft key
4
with the display
allocation “HP-F”.
➮
Press the or button
7
to switch
the high-pass filter on/off.
When the high-pass filter is activated,
➮
select the desired amplifier filter, “FIL-
TER1” - “FILTER5” using the or
button
7
.
➮
Press the OK button
5
to return to the
previous menu level or the MENU but-
ton
8
to leave the menu altogether.
The settings are now stored.
HIGH-PASS FILTER SUBOUT/SUBWOOFER