Sl top and sub bracket kit – KV2 Audio SL Brackets User Manual

Page 5

The SL TOP BRACKET KIT consists of a pre-drilled oblong steel plate that has apertures with pre-fixed
points to allow the securing of the SL412 enclosure to multiple stacked SL215 Bass enclosures by
either inserting 2 x M10 Hex bolts, (KVV 987 300) or D6 quick release pins, (KVV 987 312), through the
plate and into each M10 mounting point on each side for each enclosure,
(6mm Allen key included). Using the alternate apertures in the plate, it is possible to create a down-
ward tilt/angle for the SL412 enclosure.
Included in the kit is a steel wall-securing arm which attaches to the top edge of the upper SL215 Bass
enclosure, by inserting one M10 Hex bolt through the arm and into the M10 mounting point.
The extended arm is then attached to a wall or beam structure for stability of the vertical stack
employed.

The SL SUB BRACKET KIT consists of a pre-drilled oblong steel plate that has four corner apertures to
allow the secure vertical stacking and fixing of multiple SL215 subwoofers, by inserting 2 x M10 Hex-
bolts through the plate and into each M10 mounting point on each side for each enclosure,
(6mm- Allen key included).
Included in the kit is a steel wall-securing arm which attaches to the top edge of the upper SL215 Bass
enclosure by inserting one M10 Hex bolt through the arm and into the M10 mounting point.
The extended arm is then attached to a wall or beam structure for stability of the vertical stack
employed.
The SL412 and SL215 come complete with pre-loaded M10 mounting points and Bolts with a total
of 20 fixing points at different locations of the enclosure.

Please refer to diagram example below

SL TOP
BRACKET KIT

SL SUB
BRACKET KIT

SL Top bracket with marked angles

ack

ets

Top

and

Sub

Bracket

kit

SL Top and Sub Bracket kit

SL412

SL2.15

0°

5°

10°

15°