Braun MULTIQUICK MR 5550 M CAV - Manual (Page 5)

5
English
Our products are engineered to meet the
highest standards of quality, functionality and
design. We hope you thoroughly enjoy your
new Braun appliance.
Caution
Please read the use instructions carefully
and completely before using the appliance.
• The blades are very sharp!
• Always unplug the appliance before
assembling, disassembling, cleaning or
storing.
• The appliance must be kept out of reach of
children.
• Do not hold the motor part nor the whisk
gear box under running water, nor
immerse them in water.
• Braun electric appliances meet applicable
safety standards. Repairs or the
replacement of the mains cord must only be
done by authorised service personnel.
Faulty, unqualified repair work may cause
considerable hazards to the user.
• Before plugging into a socket, check
whether your voltage corresponds to the
voltage printed on the bottom of the
appliance.
• The appliance is constructed to process
normal household quantities.
• Neither the beaker , nor the chopper bowl
(c) is microwave-proof.
Description
Motor part
On/off switch for variable speed
On/off switch for turbo speed
Buttons for releasing the working parts
Variable speed regulator
Blender shaft
Wall mount
Measuring beaker with air-tight lid
Whisk gear box
Whisk
Chopper
Setting the speed
When activating switch , the processing
speed corresponds to the setting of variable
speed regulator
. The higher the setting, the
faster the chopping results.
However, maximum processing speed can
only be achieved by pressing the turbo switch
. You may also use the turbo switch for
instant powerful pulses without having to
manipulate the speed regulator.
Depending on the application, we recommend
the following speed settings:
Handblender 1...turbo
Chopper 1...turbo
Whisk 2...4
How to operate your handblender
The handblender is perfectly suited for
preparing dips, sauces, soups, mayonnaise
and baby food as well as for mixing drinks and
milkshakes.
1. Insert the motor part
into the blender
shaft until it locks.
2. Introduce the handblender in the vessel,
then press the on/off switch or
the on/off turbo switch .
3. To release the blender shaft after use, press
buttons and pull it off.
A
I
H
A
B
C
D
E
F
G
H
I
J
K
B
E
C
A
F
B
C
D
98813841_MR5550_China Seite 5 Donnerstag, 11. Dezember 2008 10:53 10