BT 1300 Executive - Manual (Page 24)

On-Air 1300 Executive user guide ~ Edition 3 ~ 7th August ’01 ~ 3992
23
Note
Once you have recorded your outgoing message
the answer machine will automatically be
switched on. Remember, if the last message
recorded was the
answer only outgoing
message then the answer machine will be On
but callers will not be able to leave messages.
Use the UP or DOWN button to scroll
to Answer machine.
Press OK to confirm.
Use UP or DOWN button to scroll to
Play OGM
.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Answer and record or Answer only.
Press OK to confirm.
Your outgoing message will be played.
▲
▼
▲
▼
▲
▼
C OK
C OK
C OK
To listen to your outgoing message
Use the UP or DOWN button to scroll
to Answer machine.
Press OK to confirm.
Display will show Delete.
Press OK to confirm.
Display will show Outgoing Messages.
Press OK to confirm.
Your outgoing message for both Answer
and Record
and Answer only modes
has now been deleted and your answer
machine will turn itself off.
▲
▼
C OK
C OK
C OK
To delete your outgoing message
Note
If you have recorded both outgoing messages
then they will both be deleted.
The default ring setting will be 5 rings.
Use the UP or DOWN button to scroll
to Base.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Base settings.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Answer.
Press OK to confirm.
Use the UP or DOWN button to scroll
to Ans. Delay.
Press OK to confirm.
Use the UP or DOWN button to scroll
to the required number of rings,
between 2 and 5. If 1 is selected this is
the time saver setting, this allows you
to call from another phone and if it
rings 4 times there are no new
messages, if the call is answered after
2 rings there are new messages.
Press OK to confirm.
▲
▼
C OK
▲
▼
C OK
▲
▼
C OK
▲
▼
C OK
To adjust the number of rings
before the answering machine
switches on
▲
▼
C OK