KOCASO M709 - Manual (Page 26)

26
Fill then click the link, and you will see the screen above the status bar 3G symbol
appears, indicating the completion of 3G is connected, and then you can get online.
33 ADSL Settings
Tap ADSL Settings application icon.
Input name and password then click connect to access the broadband network.
34 Ethernet
Make the transfer box connected to the USB switch interface of the device, and then plug the
network cable into the Ethernet port of the transfer box, in the upper right corner of the
screen appears "ETH".
Tap Ethernet application icon.
The device can automatically access network IP address connection. And you can choose
manual setup IP address to get a connection.
35 SETTINGS
Wireless &
networks
Wi-Fi Turn on Wi-Fi.
Wi-Fi Settings Set up & manage wireless access points.
Airplane mode Disable all wireless connections.
3G network settings Set up 3G network.
Ethernet Configure Ethernet.
Pppoe
settings
Do ADSL settings. Input user name and password to
connect.
USB
Mass storage Configure USB to mass storage.
ADB Configure USB to ADB.
Sound
Silent mode Silence all sounds except media & alarms.
volume
To adjust the Media volume, Alarm volume and
Notification volume. Tap & slide
and then tap OK.