Kinetik Thermometer IET1C - Manual (Page 15)

Problems & Troubleshooting
Problem Check Solution
No response
Battery symbol on LCD
“Lo” on screen
(result below 32 C /89.6 F) o o
“Hi” on screen
(result above
42.9 C /109.3 F) o o
“ErrE” on screen
“ErrU” on screen
“ErrH” on screen
Battery flat
Incorrect polarity
Low battery
Is the thermometer
inserted correctly?
Is the probe dirty?
Thermometer outside
of range
Will not measure after
pressing
Error detected
Install new battery
Replace battery in
correct polarity
Install new battery
Follow user instructions in
the manual
Clean the probe
Condition the thermometer
before use at room
temperature
Follow users instructions
in the manual
Return product to your
local distributor
14