Kinetik Blood Pressure BPM4TL - Manual (Page 18)

Abnormality & Troubleshooting
Worn-out batteries. Replace them with 4
new AAA alkaline
batteries. Unit does not turn on when
START/STOP button is pushed.
Battery polarities have been
positioned incorrectly. Re-insert the
batteries in the
correct positions.
Cuff has been placed incorrectly.
Wrap the cuff properly
so that it is positioned
correctly.
Did you talk or move during
measurement?
Measuring Error Symbol
appears when blood pressure
value displayed is excessively
low or high.
Shaking of the arm with the cuff on.
Measure again. Keep
arm steady during
measurement.
Measuring Error Symbol
Air circuit abnormality.Cuff tube may
not be plugged into monitor correctly.
Check cuff
connection. Measure
again.
Measuring Error Symbol
Inflation pressure exceeding 300 mmHg.
Switch the unit off,
then measure
again.
Measuring Error Symbol
Error determining measurement data. Measure again.
Note: If "EP" appears on the display, just return the device to your local distributor or importer.
SYMBOLS/SYMPTOMS CONDITIONS/CAUSES
INDICATION/
CORRECTION
17