Kinetik Pain reliever DT1 - Manual (Page 15)

13
1. Please use 4 x AAA batteries in the unit (included).
2. Remove the batteries if the product is not in use for long periods of time.
3. Do not mix old and new batteries or different types of batteries.
4. Warning: If batteries leak and come into contact with the skin or eyes, wash immediately
with copious amounts of water.
5. Batteries must be handled by an adult. Keep batteries out of the reach of children.
6. Only batteries of the same or equivalent type as recommended are to be used.
7. Do not use rechargeable batteries.
8. Remove exhausted batteries from the unit.
9. Supply terminals are not to be short circuited.
10. Dispose of batteries safely according to battery manufacturer’s instructions.
BACK
BATTERY COVER
AAA
AAA
Battery Information
14
Specification
• Power Source: DC: 6.0V 4 x AAA batteries (included)
• Frequency: 4~128Hz
• Band width: 60-200µs
• Output current: Max.30mA±20%
• Output voltage: 40V(P-P) by 500 load±20%
• Size: 60(w) mm x 140 (h) mm x 26 (d) mm (approx.)
• Operating conditions: 5ºC ~ 40ºC; < 80%RH
• Storage conditions: -20ºC ~ 55ºC; < 95%RH
• Auto time setting: 15 minutes
• Weight: 86g
• Output intensity level adjustment: 1-8 (8 levels)
• Mode selection: 8 settings