Kees AIR MIXERS - Manual

KEES, INC.
Products for Sheet Metal HVAC, Food Service, & Architectural Construction Industries
400 S. INDUSTRIAL DRIVE - P.O. BOX L - ELKHART LAKE, WISCONSIN 53020 - (920) 876-3391 - FAX (920) 876-3065
Mix
x
er Section ™ Installation Guide
Mix
x
er Section Installation, Operation And Maintenance
Installation
The Mix
x er Section is manufactured complete with Air Mix x
er and flanges to match stan-
dard air handlers. Gasketing between Mix
x
er Section and other air handling equipment
should be used to seal against air leakage. The Mix
x
er Section shall be match drilled in
the field for proper fit up to standard air handling equipment.
Operation
Once installed, the Mix
x
er Section, including Air Mix
x
er, requires no operating instruc-
tions. The section utilizes a fixed position Air Mix
x
er with no moving parts.
Maintenance
The Mix
x
er Section is constructed of 18 gauge galvanized iron with heavy gauge alu-
minum (.080”) Air Mix x
er and does not require any special maintenance under standard
HVAC operation.
MSIG 02/96