Bose LIFESTYLE 38 - Manual (Page 46)

46
Using System Menus
F
ran
çai
s
E
s
p
a
ñ
o
l
Eng
li
s
h
Video options
Press the System button on the LIFESTYLE ® remote control. Move right to see a preview of
video features. Press the down button to move into an active display of submenus.
Figure 19
Video preview
Note: For information on using the TV sensor, refer to “Installing the TV on/off sensor” in your
Install Guide.
Video
Important Note:
DO NOT change settings for Com-
ponent video or Progressive scan
in the System menu. Doing so can
cause your TV screen to go blank,
making completion of the process
difficult.
Instead refer to “Component video
or progressive scan: activating
your selection” on page 16.
select navigate
TV Power
TV Power Status
TV Aspect Ratio
Widescreen DVDs Video Connector
Video Black Level
Video Format
Progressive Scan
Active Display Item
Default Settings;
Options Effect of this Setting
TV Power Automatic
Manual
Euro
TV turns on automatically when a video source is selected.*
TV does not come on automatically.
TV responds to SCART connector input.
TV Power Status
(not a setting) TV Not Detected
TV On
Indicates: TV Sensor not installed or not positioned correctly.
Indicates: TV Sensor installed and functioning properly.
TV Aspect Ratio Normal
Widescreen
4:3 ratio screen display.
16:9 ratio widescreen display.
Widescreen DVDs Modified
Unmodified
DVD video reformats, as needed, to fit a 4:3 TV screen.
DVD video does not reformat automatically.
Video Connector
(See Important Note above.)
Composite, S-VIDEO
Component
System works with composite and/or S-video TV connection.
System works with component TV connection.
Video Black Level Normal
Extended
Screen black level generally appropriate for TVs.
Reduces screen black level, appropriate for certain TVs.
Video Format NTSC
PAL
Correct for NTSC (U.S. standard) monitors.
Correct for PAL (European standard) monitors.
Progressive Scan
(See Important Note above.) Off
On
Screen image repaints in standard style.
Screen image repaints in advanced style (must be supported by
the TV).
*The TV sensor must be installed and positioned to detect if the TV is on or off.