BUSH A632N - Manual (Page 14)

VIEWING MODE ILLUSTRATIONS
Normal Mode
The original content would be at the centre of the screen.
16:9 Content 4:3 Content
Wide Mode
The original content in this mode has to fill the entire screen of the display.
16:9 Content 4:3 Content
Z Mode
For those wide format images which are originally programmed into 4:3 frames with black
bars around, this mode would stretch the image in both width and height for full display with
active data.
Same image in ZOOM mode
oom
CONNECTING EQUIPMENT
Coaxial (RF)
Using Your Antenna or Digital Cable for
DTV .
26"/32"
42"
1. Turn off the HDTV.
2. Connect the coaxial (RF) connector from
your antenna or digital cable (out-of-the-
wall, not from the Cable Box) to the TV
ANTENNA connector.
3. Turn on the HDTV.
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
Using Your Antenna or Cable for DTV .
26"/32"
42"
1. Turn off the HDTV.
2. Connect the coaxial (RF) connector from
your antenna or cable (out-of-the-wall, not
from the Cable Box) to the TV ANTENNA
connector at the rear of the HDTV
3. Turn on the HDTV.
4. Select ATV/DTV using the SOURCE button
on the remote control or the control key
on the side of the TV.
Using the Antenna or Cable for your
VCR
26"/32"
42"
1. Turn off the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or
“Antenna Out” connector on the rear of
your VCR to the TV ANTENNA connector
at the rear of the HDTV.
3. Turn on the HDTV and VCR.
BUSH | HD Ready LCD TV | User Manual | Customer Helpline 0845 604 0105 12