Wearing style, En g li sh – Jabra EASYGO User Manual

Page 8

Jabra EaSYGO

CONNECTIVITY

SELECT

MobilSurf

BLUETOOTH

Infrared port

Wap options

Synchronization

Networks

DEVICES FOUND

Jabra EASYGO

Passkey:

****

HANDSFREE

SELECT

Jabra EASYGO

added.
The handsfree is

now ready for use

SELECT

Manual pairing mode
If you wish to use the headset with a different phone, or if the

pairing process was interrupted, you can manually set the headset

to pairing mode .
Make sure the headset is on . Press and hold the answer/end button

for approximately 5 seconds until the Bluetooth® icon turns from

a steady light to a flashing light . then repeat steps 2 and 3 in the

above pairing guide .
Connecting with your phone
Pairing is only needed the first time a headset and phone are

used together . When the headset and phone have been paired

once, they will automatically connect when the headset is on and

Bluetooth® is activated on the phone . the headset can be used

when it is “connected” to the phone . If the devices are paired, but

do not immediately connect, tap the answer/end button . When

your headset is connected the Bluetooth® connection icon in the

StatUSDISPLaY™ WILL bE COnStant On FOr 3 SECOnDS and

the headset voice guidance will say “connected” .

WEARING STYLE

the Jabra EaSYGO is ready to be worn with or without the ear hook .

the ear hook can be removed and the headset can be used with

the Ultimate-fit Eargels™ .
the Ultimate-fit Eargels™ can be used for both left and right wearing .

the Ultimate-fit Eargels™ come in two different styles to fit any ear .

You can also twist the eargel slightly to optimize the fit and comfort .
For optimal performance, wear the Jabra EaSYGO and your mobile

phone on the same side of your body or within line of sight . You will

get better performance when there are no obstructions between

your headset and your mobile phone .