Jabra EXTREME2 - Manual (Page 14)

13
english
Jabra EXTrEME2
and green light will light up in a white light . In this mode, the
pairing list is reset, and you can test if the headset works as you
will be able to hear audio in the speaker from the microphone .
- The headset will automatically turn off after approx . 10
seconds . The next time you power on, the headset will go
into pairing mode as the first time you powered your new
EXTrEME2 on .
Will the Jabra EXTREME2 work with other Bluetooth®
equipment?
- The Jabra EXTrEME2 is designed to work with Bluetooth®
mobile phones . It can also work with other Bluetooth® devices
that are compliant with Bluetooth® version 1 .1 or higher
and support a headset, hands-free and/or advanced audio
distribution profile .
I cannot use Reject call, call on hold, Redial or voice dialing
- These features are dependent on the ability of your phone or
other Bluetooth® device to support a hands-free profile . Even if
the hands-free profile is implemented reject call, call hold and
voice dialing are optional features which are not supported
by all devices . please consult your device manual for details .
please note that some features can only be operated from the
primary device e .g . voice dial .
My Jabra Product does not announce the caller names during
incoming calls
- Ensure that your phone supports the bluetooth® phonebook
access profile (pbap) and that the name of the caller is in your
phonebook .
please note that on some android phones a warning message
about the phonebook access appears in the top left corner . You
must select this message and agree to the connection in order to
get caller ID to function properly .
The music player starts playing when connecting to the
headset, you experience connect/disconnect issues or the
headset has short battery life
pair your headset again to the device in order to avoid this behavior .
1 . Ensure that the headset is on . If the music streaming has
started, turn the music player on the phone off
2 . press and hold the answer/end button for approx . 5 sec . until
the light turns to solid blue