Jabra SPEAK 450 for CISCO User Manual - Manual (Page 7)

6
english
Jabra speak 450 for CisCo
connect to jabra link 360
1. set the Off/On/Bluetooth switch to the Bluetooth setting, on
the base of the jabra speak 450 for Cisco.
2. tap the Connect button on the base of the jabra speak 450
for Cisco.
3. Plug the jabra link 360 into any available usb port on your
PC/vXi, and wait for approx. 30 seconds for a connection to be
established.
Note: ensure that all bluetooth devices previously connected to
the jabra link 360 are switched off.