Jabra HANDSET 450 for CISCO User Manual - Manual (Page 3)

2
english
Jabra HaNDSET 450 for CiSCo
Jabra Handset 450 for CisCo
oVerVieW
Mute
microphone
speaker
down
usb port
speaker
up leD
indicator
turning on/off
the jabra Handset 450 for Cisco will always be powered on when
docked in the handset cradle, and the cradle is plugged into a
usb port.
to turn off the jabra Handset 450 for Cisco, press and hold (5 secs)
the mute microphone button. press the mute microphone button
again, to turn back on. the jabra Handset 450 for Cisco cannot be
turned off if the cradle is plugged into a pC that is turned on.
the jabra Handset 450 for Cisco will automatically power off when
out of range (20 m or 66 ft) of the handset cradle for 4 minutes or
longer.