IPitomy IP330 User Manual - Manual (Page 18)

Smarter Business Communications
IP330
H D - E Q U I P P E D
E N T E R P R I S E - G R A D E
V O I C E E N D P O I N T
- 18 -
21. Transfer Line-to-Line
Sometimes it’s desirable to transfer a call to a line that you have previously placed on hold. The IP330 makes this
possible with Transfer Line-to-Line.
In this operation, one caller is on hold and the other is on the active line (connected to you). To connect these two
people together simply transfer the connected call to the held call. As follows:
Steps: 1 2
Tr
an
sf
er
Lin
e
-to
-L
in
e
Line on Hold
Connected Call
(other line)
Press
OR
Press
Line on Hold
The call to which
you were
connected is now
connected to the
call that had
been on hold.
(Your phone returns
to idle)
22. Using Mute
When Mute is active, you can hear other parties on a call but they cannot hear you. You can use mute in any of the
modes:

Handset

Speakerphone

Headset
Steps: 1
An
n
o
u
n
ce
d
Tr
an
sf
er
On a call
(any line)
Press
Red indicates
Mute is active
Notes:
1) Mute May be activated prior to connection.
a) Press Mute then lift handset
b) Press Mute then press Speaker Button
c) Press Mute then press Headset Button
2) Mute may be activated and deactivated during a conversation
3) When a connection is ended, Mute will automatically deactivate