iCreation speeCup Product Information Guide - Manual (Page 16)

2
CHARGING
speeCup has a built-in Li-ion battery (3.7V, 1.6A), so it can be
used without connecting to a power supply. To charge the
battery, follow these steps:
Connect the micro USB connector to the speeCup DC 5V
input.
Plug the USB full-size connector into the 12V accessory car
plug supplied.
A common USB type AC charger (DC 5V, 500mA) can be
used as well.
speeCup can be charged by plugging the USB connector
into a computer.
1.
3.
2.
4.
When speeCup is charging the LED status indicator will
be RED. When fully charged the RED status indicator
LED will go off.
From fully discharged battery to full charge will take
several hours.
A fully charged speeCup will last for up to 20 hours of use.
SPECIFICATIONS
Frequency Range:
Channels:
Modulation
Standby Time:
Charging Time:
Power Supply:
Humidity:
:
2.402GHz - 2.480GHz
75KHz
5V, 500mA
0%~90%
79
0
209*85
: +-
Carrier Power:
Frequency Stability
<2.5mW
GFSK
336Hours
5Hours
Ambient Temperature:
Size(mm):
℃ ℃ ~ 45
15