BUSH DAB + ALARM CLOCK RADIO BCR31DAB - Manual (Page 10)

BCR31DAB
10
To Show the Signal Strength in DAB+ Mode
1. Press the MENU Button during play, and ‘Info’ will be displayed on the screen. Then press the SELECT/NAV
Button to confirm.
2. Press the MENU Button and the SELECT/NAV Button repeatedly until Signal Strength is shown on the display. A
signal bar will be displayed as shown below.
The indicator on the signal bar shows the minimum acceptable
signal level.
@
Note: Stations with signal strength below the minimum signal level will
not provide a steady stream of audio.
DRC (Dynamic Range Control)
You can set the level of the compression of stations to eliminate the differences in dynamic range or sound level
between radio stations.
@
Note: Set DRC to off indicates no compression, set DRC to low indicates little compression, and set DRC to high shows
maximum compression.
1. Press the MENU Button, then press the or Buttons to select the DRC menu.
2. Press the SELECT/NAV Button to confirm.
3. Press the or Button to select ideal DRC Mode. Press the SELECT/NAV Button to confirm.
Prune Order
@
Note: Pruning Radio order will remove inactive stations from the station list.
1. Press the MENU button, then press or to select Prune menu.
2. Press the SELECT/NAV button to confirm.
3. Press or to select Yes, and then press SELECT/NAV to confirm.
Using DAB+ Radio