Britax ROUNDABOUT 55 User Manual

Page 52

Lap Belt Installation

Before You Begin:

• Check that your vehicle belt is compatible for use with child

seats. See pages 8 – 13 for more information.

• Remove the Versa-Tether from the pouch and place it up

and over the child seat back.

* Britax recommends that the Versa-Tether is used at all times.

Using the tether will improve the stability of the child seat and

reduce the risk of injury. Check your vehicle owner’s manual for

tether anchor locations. Only attach the Versa-Tether to anchor

points designated to the chosen seating position as indicated

by your vehicle owner’s manual.

• This child seat must be in position 1 or 2 and placed

forward facing on the vehicle seat.

* Ensure that no more than 20% or 3 inches (7.6 cm) of the base

hangs over the edge of the vehicle seat. See page 23 for more

information.

Forward-Facing Installation