Bissell V. (VERSUSTM ) 76T8 - Manual (Page 6)

M
aintenance and care
O
peration
6
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
How to use your bare floor vacuum
The bare floor vacuum is a quick and easy way
to clean your bare floors and low pile carpets.
1. Lightly press foot of vacuum and pull handle
back to detent.
2. Turn power switch to ON (I) position.
3. Clean along edges, in corners, and around
tables and chairs by lining unit up along
surface you want to clean.
4. When finished cleaning, turn power switch
to OFF (0) position.
5. To properly store, return handle to upright
position.
Emptying the dirt container
Dirt container should be emptied before debris
reaches the “full” line on front of container.
1. Unplug unit from electrical outlet.
2. Slide Lock ‘n Seal ® lever to “unlock” position.
3. Grasp clear dirt container and pull out to
remove from vacuum.
4. Empty dirt into trash can.
5 . Put dirt container back in vacuum and slide
lever to “lock” position.
Note: Dirt container needs to align with
notch inside of unit in order to click into
place. Make sure dirt container is secure
before turning unit on.
Lock 'n Seal ® Lever
ug110-4049_76T8_408.indd 6 ug110-4049_76T8_408.indd 6 6/5/08 3:24:08 PM 6/5/08 3:24:08 PM