Gamber-Johnson 7160-0324 - Manual (Page 3)

Installing the CF19 computer into the cradle
Step 1: Make sure no loose or foreign
objects are on the surface of the cradle.
Step 2: Place the front edge of the computer
into the cradle. Two notches on the front
edge of the computer case will fit onto the
two hooks along the front edge of the
cradle.
Step 5: A padlock with a 9/32" diameter
shackle can be used to help secure the
computer to the cradle.
Step 4: Lower the back edge of the
computer down onto the cradle. Press down
on the computer to align the rear hooks with
the notches in the back side of the
computer. Tighten the hand knob to engage
the rear hooks into the notches and secure
the computer down onto the cradle.