GAM TSPS-20 - Manual

Page 1 of 2 www.rosco.com
GAM Product #TSPS-20
Rosco Product # 205 7142 00050
TSPS-20 DUAL POWER SUPPLY
PRODUCT INSTRUCTIONS
• The GAM Power Dual Power Supply has a 60 watt
capacity so that it can comfortably handle two units
such as two indexing TwinSpin™ or the 6-Gobo
Trays (for each one).
• The GAM Dual Power Supply will work on either
120 or 230 volts 50 or 60 Hz, simply plug it
in and it automatically selects its operating mode
when you plug it into an AC outlet.
• There is one removable AC power cord supplied
with each unit. Wired to the power supply are two
XLR connectors one for DMX input control and one
for power distribution. The 5-pin male connector
is for DMX signal. The four pin female connector
is power and control distribution to your unit.
• Connect your DMX signal (from your control console)
to the 5-pin connector.
• Plug the 4-pin XLR connector into your unit (6-Gobo
Tray or Indexing Rotator). You can then loop to one
more unit using a 4 wire extension cable with male
and female 4-pin XLR connectors.
• Plug the AC power supplied with the GAM Dual
Power Supply into a 120 or 230 volt - 50 or
60 Hz outlet.
4-pin XLR
Power and Control to Unit
5-pin XLR
DMX from Console
To AC Power
AC Connection
AC Power Cord
4-pin XLR connector
5-pin XLR connector
R