Bosch MCP 3500 - Manual (Page 6)

6
1. Press halved citrus fruit onto the pressing cone.
2. Hold fruit in position.
Note: The citrus juicer starts running when the fruit is
pressed onto the pressing cone.
q The pressing cone may rotate in a clockwise or
antiĆclockwise direction.
q The direction of rotation may change while the fruit
is being pressed.
q If excessive pressure is applied, the pressing cone
stops. Reduce the pressure until the pressing
cone restarts.
3. To switch off the appliance, reduce the pressure
on the pressing cone and wait untill the citrus
juicer stops.
4. Empty the full strainer basket.
Note: The fruit pulp content of the juice can be
adjusted by rotating the lower filter insert.
q A narrower gap means less fruit pulp, but also
a slower flow rate.
q If more pulp is required, adjust or remove the lower
filter insert.
q Dismantle the strainer basket before cleaning.
q When reĆassembling the strainer basket, ensure
that the parts are in the correct position.
Pressing fruit