Briggs & Stratton 074000 - Manual (Page 14)

4. If dirty, use compressed air to dislodge dirt from air filter
media. Also, blow debris out of air filter cover and
compressor filter housing (see Figure 10).
NOTE: DO NOT use liquid solvents to clean filter media.
5. Replace air filter media in compressor filter housing.
6. Position air filter cover over air filter media. Use phillips
screwdriver to secure cover with screw.
NOTE: Replace air filter media if it is extremely dirty.
Inspect Pump Intake and Exhaust
Valves
Once each year, certain internal compressor components
must be inspected. Have a trained service technician perform
this check, to include the air compressor pump intake and
exhaust valves.
Inspect Safety Labels
As often as desired or at least yearly, inspect all labels applied
to the air compressor. All safety labels should be present and
readable. If any safety label is missing or illegible, obtain a
replacement from an authorized service center or call the air
compressor helpline at 1-800-743-4115.
MAINTENANCE
14
• DO NOT direct air stream at self or others.
• Always wear ANSI Z87.1 approved safety glasses with side
shields.
Compressed air stream from hose or tank drain
can cause soft tissue damage to exposed skin and
can propel objects leading to severe injury
and / or property damage.
WARNING