BenQ MP620C User Manual
Page 14
Introduction
10
4.
3Left, Right4
When the on-screen menu is activated, the
5Up, 6 Down, 3Left and
Right
4buttons are used as directional arrows to select the desired menu items and to
make adjustments.
5.
for more information.)
Displays or hides the On-Screen Display (OSD) menu system.
6.
Keystone
(Refer to page
"Correcting keystone" on page 29
for more
information.)
Manually corrects distorted images resulting from an angled projection.
7.
"Setting the presentation timer" on page 35
for more
information.)
A multifunctional key that activates, displays or hides on-screen timer based on your
own timer setting.
8.
"Wireless connection (optional)" on page 17
for more
information.)
When a wireless module is installed and the Wireless Connection menu is displayed,
press this button to toggle between LAN or Wireless connection modes. (The wireless
module is available through BenQ retailers.)
9.
"Wireless connection (optional)" on page 17
for more information.)
When a wireless module is installed and the Wireless Connection menu is displayed,
press this button to change the wireless connection mode between IEEE 802.11 a and
IEEE 802.11 b/g. (The wireless module is available through BenQ retailers.)
10.
"Setting the presentation timer" on page 35
for more
information.)
Enters presentation timer setting directly.
11.
Auto (Refer to
"Auto-adjusting the image" on page 29
for more information.)
Automatically determines the best picture settings for the displayed image.
12.
"Switching input signal" on page 28
for more information.)
Sequentially selects the input signal RGB, Component Video, S-Video, Video or DVI-
I.
13.
for more information.)
Used to hide the screen image. Press any key on the remote control to restore the
image.
14.
Mode (Refer to
"Selecting a picture mode" on page 31
for more information.)
Sequentially selects a predefined picture setting available for each input.