Eschenbach Optik Prisma AF - Manual (Page 3)

Page 3
Prisma AF English Rev 1.00
Installation
Insert the output cable
into the rear of the
camera.
Plug the SCART
connector into the
television* and power on
the television.
Plug the transformer into
a wall socket and…
…plug the power
connector into the socket
located mid-way along
the output cable.
Power on the Prisma AF.
You should have an
image on the TV. If not,
use your TV’s remote
control or control panel to
switch to “Video” or
*If you do not have a SCART input on your TV, you can use the trailing phono
cable to plug into the yellow video input jack on your TV