Eschenbach Optik Prisma - Manual (Page 3)

Page 3
Rev G EN
Installation
Insert the output cable
into the rear of the
camera.
Plug the video connector
into the
yellow (video-in)
jack either on the front or
back of the television*.
Plug the transformer into
a wall socket and
…
…plug the power
connector into the socket
located mid-way along
the output cable.
Prisma
Power on the Prisma.
Power on the TV and use
your remote control or
control panel to switch to
“Video” or
*If you do not have a direct video input on your TV
you will require an RF modulator
– contact your
Prisma distributor.