Eschenbach Optik Mobilux Digital - Manual (Page 8)

8
Initial device operation
Mobilux digital has an integrated lithium ion rechargeable battery.
Before using for the first time the rechargeable battery must be
fully charged. Charging takes about 2 hours. During the charging
process the red LED (w) over the power supply socket (q) lights
up. The LED goes out when the rechargeable battery is fully charged.
You can use the mobilux digital while it is charging.
Use the mains adapter, with the customary plug adapter for your
country (EU, GB, US), only in a properly connected mains socket. To
change the plug adapter slide the locking mechanism on the mains
adapter in the direction of the arrow and remove the plug adapter.
Insert the desired plug adapter and release the locking mechanism.
A loop (y) is provided at the end of the handle to facilitate the hanging
of the mobilux digital. A Lanyard as well as a cleaning cloth and case
are enclosed.
Switching on/off
Slide the on/off switch (e) in the direction of the display (r) to turn
the device on. The LEDs on the underside of the device will begin to
light up and in the display the charging condition of the rechargeable
battery is show briefly. The indicator appears blue with mains power
operation and green with rechargeable battery operation.
Hold the mobilux digital with the display centred over the text that is
to be reproduced, magnified, in the display.
Selecting the magnification/display modes
With the button (i) you can switch between 3-fold and 6-fold
magnification.
Press the button (u) to switch between the display modes (true
colour display as well as contrast enhanced positive and negative
displays).
When switched on the previously set mode (magnification, colour) is
maintained.
Switching illumination on/off
If you hold down the button (u) for 3 seconds the LED illumina-
tion switches off. This is useful when reading with reflective back-
grounds, for example, road maps behind glass or high gloss brochures.
Adjusting for fixed-images
If you press the button(t) the image currently depicted in the
display will freeze. Thus you can, for example, display text that is
located in a poorly accessable spot.
Automatic switch off
After 3 minutes without image changes the mobilux digital switches to
the energy saving mode and the display becomes black.
mobilux_digital_multi.indd 8 08.09.2010 13:54:21