Eschenbach Optik Distance Camera - Manual (Page 2)

Rev D EN 2
EX1 Distance Camera
Instructions for use
Introduction
The EX1 Distance Camera is designed to allow distant Images to
be magnified on Ash Technologies’s ‘Liberty Solo’ or ‘Andromeda’
units. When used with the Liberty Solo the Distance Camera can
work in conjunction with the Mouse Camera but also on its own.
Contents of package:
The Distance Camera is supplied with the following items. Please
verify that you have received all of these items on delivery of the
package:
• Distance Camera unit
• Camera pouch
• User manual
• Liberty Solo mounting bracket with 2 x Fixing Thumb Screws
• Cable to connect between the camera and the Liberty Solo.
• 2 x Replacement M3 X 16mm Screws
OR
• Andromeda mounting bracket and plate with 2 x Fixing Thumb
Screws
• Cable to connect between the camera and the Andromeda
unit.
• 2 x M4 X 12mm Screw
Warning:
The camera Output on the EX1 Distance Camera was NOT
designed to connect to a computer network! Plugging a
network cable into the Camera will potentially damage both
the network and the Distance Camera irreparably.