Belkin F5D4071 - Manual (Page 9)

7 6
Installing and Setting Up the Adapters
se
ct
io
n
1
2
3
4
7 6
Hardware Setup
ardware Setup
1. Plug your network cable into the computer’s RJ45 network adapter port.
2. Plug the other end of your network cable into the RJ45 port located at
the back of the Adapter. re Setup
3. Plug the power cable into the power connector at the back of
the Adapter.
4. Plug the power plug of your power cable directly into a power outlet in
the wall.
NOTE: Do not plug the device into a UPS or power strip with surge protection.
The Adapter has its own power filter for protection against surges.