Scarlett SC-178 - Manual (Page 3)

www.scarlett-europe.com SC-178 3
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Please read this instruction manual carefully before use and keep in a safe place for future reference.
· Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
· For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.
· Do not use outdoors.
· Always unplug the appliance from the power supply before cleaning and when not in use.
· To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids. If it was
happened DO NOT TOUCH the appliance, unplug it immediately and check in service center.
· Do not take this product into a bathroom or use near water.
· Do not place appliance or parts near an open flame, cooking or other heating appliances.
· Close supervision is necessary when it is used near children.
· Do not leave the appliance switched on when not in use.
· Do not use other attachments than those supplied.
· Do not operate after malfunction or cord damage.
· Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
· Keep the cord away from sharp edges and hot surfaces.
· Do not pull, twist, or wrap the power cord around appliance.
· Never insert fingers, pencils or any other object thorough the guard when the fan is operating.
· Do not operate without fan grill properly installed.
· To reduce the risks of electric shock do not switch the appliance by wet hands.
ASSEMBLY INSTRUCTIONS
· For packaging reasons the fan was delivered unassembled. Check all parts are available and not damaged.
· Do not connect the fan to the mains supply before you have completely finished the assembly.
· Pull out the extension pole from the base tube and fasten the base tube to the base with screw A.
· Fasten the base tube to the base with screws (included).
· Assemble the motor and switch box onto the extension pole and tighten screw B.
· Unscrew the spinner clockwise and the nut counterclockwise, and then remove both of them from the motor shaft.
· Assemble the rear guard in correct position with the handle on.
· Screw on the plastic nut to secure the rear guard in place.
· Assemble the blade to the motor shaft until it reaches the retaining washer.
· Tighten the spinner counterclockwise to secure the blades.
· Assemble the front guard with the logotype correctly orientated and fix both guards together with the hoop around the
edges.
· Fix the vertical draft of stand fan with the screw.
· The fan is ready for operating.
HOW TO USE
CONTROL PANEL
· There is a stand fan control panel on the switch box.
BUTTONS:
· On / Speed on button/rotation speed switch button;
· Off fan off;
· Swing to make the fan turning (revolving), press this button, and press again to stop turning;
· Timer touch this button repeatedly. Time will be half an hour as step-by-step unit. Total 15 steps; the longest time is
7.5 hours.
INDICATOR LIGHTS:
· 0.5h...7.5h switching off time;
· Max. Maximum speed rotation;
· Mid. - medium speed rotation;
· Min. - minimum speed rotation;
· Sleep - Sleeping wind;
· Natural - Natural wind;
· Normal - Normal wind;
REMOTE CONTROL
· It is possible to control and adjust the stand fan by using both control panel buttons and remote control:
- On / Speed on button/ rotation speed switch button;
- Off Off button;
- Swing to make the fan turning (revolving), press this button, and press again to stop turning;