Blaupunkt C31 - Manual (Page 14)

14
Changing Display Contents
To change the display between track
number plus CD number and track num-
ber plus play time
➮
Press the MENU button
=
.
➮
Press the or button
<
until
“CDC DISP” appears in the display.
➮
Press the button
<
.
The current display mode is shown:
“TIME” for play time and “CD NO” for
CD number.
➮
Select the desired setting with the
button
<
.
➮
Press the MENU button
=
twice.
Repeat Playing Tracks or Whole
CDs (REPEAT)
To repeat the current track
➮
Press button 3 (RPT)
>
briefly.
“RPT TRCK” flashes up briefly and the
display shows “RPT”.
To repeat the current CD
➮
Press button 3 (RPT)
>
again.
“RPT DISC” flashes up briefly and the
display shows “RPT”.
Stopping REPEAT
To stop the repetition of the current track
or CD
➮
Press button 3 (RPT)
>
until the
display shows “RPT OFF” and
“RPT” disappears.
Playing Tracks in Random
Sequence (MIX)
To play the tracks of the current CD in
random sequence
➮
Press button 4 (MIX)
>
briefly.
“MIX CD” flashes up, the display shows
“MIX”.
To play the tracks of all the CDs in the
CD changer in random sequence
➮
Press button 4 (MIX)
>
again.
“MIX ALL” flashes up and the display
shows “MIX”.
Ending MIX function
To end the playing of tracks in random
sequence
➮
Press button 4 (MIX)
>
until the
display shows “MIX OFF” and
“MIX” disappears.
Sampling All Tracks on All CDs
(SCAN)
To listen to a short sample of all tracks
on all the CDs in the CD changer
➮
Press the SCAN button
4
.
“SCAN” appears in the display.
Ending SCAN
To halt the scan
➮
Press SCAN
4
again briefly.
The track currently being sampled will
continue to play.
CD CHANGER OPERATION