Comelit FT POWER 01 - Manual (Page 14)

GROUP S.P.A.
14 FT IPOWER 01
ENGLISH
3
5
4
When the system is in standby, to display the image
from the external unit, press pushbutton 2 (if the
factory settings have been kept).
If a second external unit is fitted, it will be possible
to switch between the two cameras. Contact your
usual installer to configure this function.
SELF-IGNITION FUNCTION MAKING AN INTERCOM CALL
USING PUSHBUTTONS 3 OR 4
To make a general internal call to all the devices in
the same residential unit, press pushbutton 3 (if the
factory settings have been kept).
To make a general external call to all the devices in
another residential unit, press pushbutton 4 (if the
factory settings have been kept).
Monitor making call.
Monitor receiving call.
To answer a call, press
pushbutton .
If video communication is already taking place, the
text “BUSY” appears.
PRIVACY / DOCTOR MODE
To activate the Privacy mode / Doctor mode, press
pushbutton . The corresponding LED will light up to
confirm activation.