Comelit MT 48086 - Manual (Page 5)

2.2 Check for presence other devices on the network
Type the IP address and the Subnet
mask. Gateway and DNS in this phase
are not necessary.
Click on the OK button in either first and
second window, return to the beginning
of the paragraph and verify your IP
address.
At this point, make sure that there isn’t
another device connected to the network
with the same IP address of the CPE. In
the case of multiple bridges connect one
at a time and change the IP address.
SKIP THIS SECTION IF YOU CONNECT THE ART. 48086 DIRECTLY TO YOUR PC OR IN A NETWORK IN
WHICH THERE ARE NO OTHER DEVICES.
To verify that in the same network there aren’t other devices with the same IP address that the art.
48086 you must open the command window by typing on the keyboard:
(key Windows of the keyboard) +
R
The following window appears:
Type cmd and click on the button OK.