Comelit MU 6302 User Manual

Page 7

Audio key

NOTE: If, after a key is pressed, LED 1 lights up for 4 seconds,
this means the function is not available or the system is busy.

Using basic Smart monitor functions
LEDs 2 and 3 flash in response to a call Fig. 2

To activate/deactivate the

audio, press

Wait for LED 3 to be lit steadily before speaking.

To activate the

electronic door lock, press A .

» LED 2 lights up for 4 seconds and a beep will be emitted to

confirm activation.

Press

to activate the

Switchboard call or Intercom call

function. ¹

» A call is transmitted to the corresponding switchboard (if present)

or an intercom.

Press

to activate the

Self-Ignition function.

» The image from the corresponding external unit appears on the

monitor.

By pressing

repeatedly, you can switch between the external

units (max. 2 if present).

¹ For further information contact your usual installer