Comark C9551 - Manual (Page 6)

5
OPERATING INSTRUCTIONS
FOR COMARK C9500 SERIES
PRESSURE METERS
GENERAL INFORMATION
WARNING
INPUT HOSES SHOULD NOT BE DISCONNECTED FROM
THE INSTRUMENT WHILST CONTAINING GASES WHICH ARE
DANGEROUS AND/OR UNDER PRESSURE .
DO NOT APPLY PRESSURES BEYOND THE OVER RANGE MAXIMUM
FOR THE INSTRUMENT OR DAMAGE MAY OCCUR .
REFER TO SECTION 3 — CONNECTION TO PRESSURE SOURCES
BEFORE OPERATING THE INSTRUMENT .
This instrument is manufactured in accordance
with the Company’s ISO 9001 Quality Approved
System.
This instrument complies with the
Electromagnetic Compatibility Directive
EN61326-1.
Declarations of Conformity available. Contact
Comark Customer Support or your local
Distributor.
In line with its policy of continuous development, Comark Instruments
reserves the right to alter the instrument specification without prior
notice. Further information is available from Comark Instruments or your
distributor.
ISO 9001
FM 26700