Comark N2015 - Manual (Page 2)

- 2 -
Connecting To Your Logger
The Diligence EV N2015 allow monitoring and logging of the loop current in a 4-20mA system. The unit does not provide
loop power and is intended for wiring into an existing transmitter circuit. The N2015 socket accepts a Lumberg SV60 locking
plug. A pre-wired plug with wire tails is supplied to facilitate wiring into the current loop. The red wire is positive, white is
negative.
Mains Powered Transmitter
+
-
L
N Red
White
N2015
Fig 1. Example Wiring
Additional plugs are available from Comark Limited as an accessory item, (Part Number 4187). The pin-out is given below if
the user wishes to make his own connector arrangement.
-ve
+ve
Fig 2. Connector Pin-out
Comark Instruments
52 Hurricane Way,
Norwich, Norfolk, NR6 6JB United Kingdom
Telephone: +44 844 815 6599 Fax: +44 844 815 6598
Email: [email protected]
Comark Instruments
PO Box 500,
Beaverton, OR 97077, USA
Tel: 503 643 5204 Fax: 503 644 5859
Email: [email protected]
Website: www.comarkinstruments.com
Part No. 17766/3
© Comark Instruments