Comark KM330 User Manual
Page 5
4
ENGLISH
KM330 DIGITAL THERMOMETER
OPERATING INSTRUCTIONS
1. GENERAL INFORMATION
It is recommended that you read the safety and operation
instructions before using this instrument.
WARNING
TO AVOID ELECTRIC SHOCK DO NOT ALLOW ANY
PROBE OR SENSOR TO COME INTO CONTACT WITH
LIVE ELECTRICAL POWER CONDUCTORS WITH
VOLTAGES IN EXCESS OF 30V AC RMS OR 60V DC.
TO AVOID DAMAGE OR BURNS, DO NOT MAKE
TEMPERATURE MEASUREMENTS IN MICROWAVE
OVENS.
THE SYMBOL ON THE INSTRUMENT INDICATES
THAT THE OPERATOR MUST REFER TO THE
WARNINGS GIVEN HERE.
CAUTION
Temperature Measurement Probes
This precision instrument has been designed for
use with the extensive range of Comark temperature
probes. The use of other probes may impair the
performance and accuracy of the instrument. Full
details of Comark probes and sensors can be obtained
from Comark Customer Support department or your
local distributor.
Repeated sharp flexing can break thermocouple probe
leads. To prolong lead life, avoid sharp bends or kinks
in the leads, especially near the connector.