Comark N9002 - Manual (Page 7)

6
4. THERMOMETER SETUP
Pressing SETUP will enter the setup menu for the thermometer.
The following stages are included in the SETUP menu and are
accessed sequentially, i.e. each stage must be access in turn to
reach the one required. Pressing ENTER will accept the setting
and step on to the next function. The setup menu can be exited
using the CLEAR key. Settings changed in previous steps will
however be retained.
4.1 Auto-Power-OFF Enable / Disable
Press SETUP
Toggle AUTO Power ON/OFF with the UP/DOWN arrow
keys.
Press ENTER/HOLD to continue.
4.2 Channel Enable / Disable
N.B. At least one channel must be selected.
Toggle T1 ON/OFF with the UP/DOWN arrow keys
Press ENTER/HOLD
Toggle T2 ON/OFF with the UP/DOWN arrow keys
Press ENTER/HOLD to continue.
4.3 Thermocouple Type Setup
Select the thermocouple type with the UP/DOWN arrow
keys.
Press ENTER/HOLD to continue.
4.4 Scale Setup
Select the scale required with the UP/DOWN arrow keys.
°C, °F and Kelvin scales are available.
Press ENTER/HOLD to continue.