Bosch DiBos - Manual (Page 19)

– 19 – BOSCH Security Systems GmbH A1 02.03
Connecting backup drive and / swapping out archive images on diskette
Saving 1. Carry out steps 1 – 4 under Looking at
archive images saved archive images.
(single images) 2. Use the recorder buttons to navigate to the
images that you want to save. Keep in mind
mind that you can only save the image that is
currently displayed on the screen.
3. Click on the Save icon, which you will find at
the bottom of the image window and on the
Save as dialog box, enter the file name with
the ending .jpg.
Connect 1. Exit DiBos from the System menu with the
backup Exit DiBos command . You must have
drive administrator authorization to do this.
2. Switch the computer off.
3. Connect the backup medium.
4. Switch the computer on and log on.
Images 1. Your backup drive must be connected. If not, see
Connecting a backup drive.
2. From the System menu, select the Image archive
command. The image archive will be opened.
3. From the Database menu, select the
Show backup drive command . A dialog box for
selecting the backup drive appears.
4. On the Select backup drive dialog box, click on
the drive. Confirm with OK.
5. From the Database menu, select the
Swap out backup command. A dialog box for
searching the archive will open.
6. Enter the archive to be swapped out and, if
necessary, additional criteria and click Search.
The system will search.
7. Enter the new backup archive name and
confirm with OK.
8. On the Database menu, deactivate the command
Show backup drive.
Swapping out saved archive images on a backup drive Saving saved archive images on diskette
Connecting a backup drive