chiliGREEN Media Recorder 3 Firmware Update - Manual (Page 2)

2 Chiligreen MR3 Firmware Update - English
Information
The Firmware is the Main-software of your hardware Device, if you have an error during the
Firmware Update, it is possible that the Hardware does not work even more.
Y OU NEED A 1 GB USB S TICK ( OR HIGHER ) IN FAT32 F ORMAT TO MAKE THE FIRMWARE U PDATE .
Checking the current Software

Connect the MR3 with your TV-System

Press the Setup-Button on the remote control

Select “System” in the Main Menue, or press the “Setup-Button” on your remote-control.

Compare your current software Version, with the software Version you become with the
Firmware Upgrade.
Downloading the actual Firmware

Visit our Homepage under http://www.chiligreen.com

Move your mouse over the “Service-Button” in the top-bar, than a drop-down-menue
should open. Select “Treiberdownload” on the drop-down-menue.

Select the Point “Externe Festplatten & Multimedia-Produkte”.

Select the Point “Externe Media-Player / Recorder”.

Select the Folder for the MR3.

Select the Folder Firmware-Updates

Now you will find the different Firmware Updates as a RAR-Archiv. Klick on it to start the
download. You need a Programm to unpack the Files. This Programm is Freeware and can
downloaded for free. Some of this Programms are: WinRar, WinZip or 7Zip… usw.

Depack the Files .
Creating the USB Stick

Connect your USB-Stick with your PC.