chiliGREEN P5RD2-TVM - Manual (Page 36)

1-24 Chapter 1: Product introduction
3. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
2 3 1 2
P5RD2-VM Keyboard Power Setting
(Default)
+5V +5VSB
KBPWR
®
P5RD2-VM