chiliGREEN P55I - Manual (Page 11)

3
selection.
The cord set must be approved for the country in
which it is used.
The appliance coupler must have a configuration
for mating with a CEE22/EN6032/IEC 320
appliance inlet.
A. For U.S. and Canada:
The cord set must be UL Listed and CSA
Certified.
The minimum specifications for the flexible cord
are No. 18 AWG.
B. For Japan:
All components of the cord set must bear a
“PSE” or “ T ” mark and registration number in
accordance with the Japanese Dentori Law.
The minimum specifications for the flexible cord
are .75m ㎡ conductors.
C. For Other Countries:
The cord set fittings must bear the certification
mark of the agency responsible for evaluation in
a specific country.
The flexible cord must be of a HAR (harmonized)
type H03VV-F.
The cord set must have a current capacity of a
least 2.5 Amperes and voltage rating of 125 or
250 Vac.
CAUTION: MODEL P55IMx(x=0~9) IS DESIGNED TO USE WITH
THE FLLOWING AC ADAPTER MODEL ONLY
Manufacturer: LISHIN INTERNATIONAL ENTERPRISE CORP.
Manufacturer: Delta
18. When using your telephone equipment, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons. These precautions
includes the following:
¾ Do not use this product near water, for example, near a
bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
¾ Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.