Carbolite 2116 without timer & ramp User Manual
Page 4
2132/2116 Controller
MC02 NTNR – 1.08
4
1.8
Stopping and Starting Control
It is possible to stop and start the controller without altering the setpoint. Press Scroll until the
legend
m-A
(manual/auto) appears. In the 2132 or 2116, manual means “off” and auto means
“on”. Press Down or Up once to show the current on/off state:
mAn
for off, and
Auto
for on.
Press or to change between manual and auto (off and on) as required.
Note that timer modes 1 & 3 set the controller to
mAn
at the end of the timing period. If the
controller unexpectedly does not control it may be in manual, possibly as the result of previous
use of the timer function.
This manual is related to the following products: