C.B.S. Scientific EPS – 300 X - Manual (Page 3)

EPS-300 X
1
A. Important Notice
Before setting up and operating the instruments, please carefully read these instructions to
get familiarized with the installation and operation process. Instructions should be read by
experienced individuals before operating the instruments.
Any improper usage of the instruments may cause damage. Please refer to the safety
notice included with this equipment.
The instruments shall not be modified or altered in any way. Any modification or alteration
will void the warranty, void the regulatory certifications and create potential safety hazard. C.B.S.
Scientific is not responsible for any injury or damage caused by using the instruments for any
non-intended purpose or injury as a result of modification of the instruments by any person who
is not authorized by C.B.S. Scientific Company, Inc.
A-1. Warranty
EPS-300X is warranted to be free from defects in materials or workmanship for a period of
one year from the original invoice date, under normal usage. Any defects occurring during
warranty period, C.B.S. Scientific will repair or replace defective products or parts without charge
unless the defects arise from conditions outlined below. The defects described below are
specially excluded from C.B.S. Scientific’s warranty policy.
1. Improper operation of the instrument.
2. Repair or modification by any person who is not authorized by C.B.S. Scientific
3. Damage caused by any (in)-direct accident, neglect or misuse.
4. Damage caused by disaster.
5. Damage caused by any improper solvents or samples
A-2. Technical and Service Contact
Most of the operation details are described in this instruction manual to assist and guide
operator for an appropriate solution. For any other technical/ service questions, please contact
your local representative or contact C.B.S. Scientific technical service specialist by E-mail:
[email protected]
.