Online manual not for resale purposes – BLITZ Power Meter i-D User Manual

Page 4

DASH MODE

Measures:

1. 0-1/8mile, 0-1/4mile, 0-5/8mile
2. 0-200m, 0-400m, 0-1000m
3. 0-50mph, 0-100mph, 0-200mph
4. 0-100km/h, 0-200km/h, 0-300km/p

In this mode you can select whether you wish to time yourself over divisions of a kilometer or a mile, and time
the vehicles acceleration in km/h or mph. To do this you need to select SPD UNIT from main menu and set the
speed unit.

To use the DASH mode, with the vehicle being stationery press ENTER to highlight the distance/speed display
in the top right hand corner of the screen. Use the up/down button to select which distance or speed you wish
to use. Press ENTER once to select your chosen dash and READY will appear on the screen. Once the car
moves, the Power Meter will automatically start counting until the goal is reached. Press ENTER to reset.

LAST RECORD

Page 4

This mode will automatically record your last six times using the dash function and store it in memory.

WARNING

The Power Meter allows the operator to set warnings for both speed and power. Scroll down to WARNING in
main menu and press ENTER. Use the up/down button to set power and speed warnings.

Page 4

Online Manual Not For Resale Purposes