Online manual not for resale purposes – BLITZ DCII Meters User Manual

Page 9

Power/Loss correction List

Vehicle Type
Passenger vehicles Examples

2WD

4WD

under 1000cc

1000cc - 1600cc

All Corolla/Civic/CR-X/87-89 Integra/

Naturally Aspirated

Mirage/Mx-5-Roadster/

-2

1601cc to 3000cc

NSX/S2000/GTO/RX-7/MR-2/MA-70

Naturally Aspirated/ Celica/Aristo/MR-S/IS300-200/Eclipse

All Turbo/

Skyline/S13-S14/Imprezza/Z32/Lancer/

Supercharged

Sedans

Stationwagon

Xb/Xa/Alero

Mininvans

Rav 4/MPV/CR-V/Element

SUV

Grand Vitara

Landcrusier/4Runner/Montero

Other

*JZA80 Supra TT 93~

-5

**For vehicles that have speedcut limiters.
Speed Limit setting
Initial value is set at 170km/h(107mph)
If the brown wire on the LIVE UNIT II harness is not used or the vehicle does NOT
speed cut, this function is NOT necessary. Please do not test on public highways
this function is designed for off-road use vehicles such as track/race vehicles on
closed curcuits and race/speed ways.
Push the PEAK and MODE buttons while turning on the ignition. Green and yellow
L.E.D.s should be blinking alternately. Needle should point to speed limit reading.

Using the PEAK and Rec switches more the needle up and down to the desired
setting for the speed cut. Setting the needle to 0 (farthest location counter-clock wise)
will disable the speed limiter. Push MODe switch to set and return to real time
monitoring.
Note: There are times on certain cars where the speed cut function may not work.
Warning: Do not verify or test the speed cut function on a public road. Please consult
a BLITZ authorized dealer for any assistance you may need.

Settings

LED alternate blinking

Pushing PEAK and MODE switch with
IGN on

REC switch
(DOWN)

PEAK switch (UP)

Speed

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be reproduced,

stored in retrevial systems, or transmitted in any form or means with out prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes