BELLA 13840 Dots Collection 12-Cup Programmable Coffee Maker - Manual (Page 8)

7
7. Functions:
Turn on the unit, the backlight indicator will be illuminated, “AM 12:00 !
CLEAN
”
will blink.
A. Regular strength coffee: press Mode button,
!
CLEAN
will flash, press SEL button for
regular coffee then press the START button. The unit will beep and begin to brew
regular coffee.
B. Gourmet strength coffee: press Mode button twice,
!
CLEAN
will flash, press SEL
button for gourmet coffee then press the START button. The unit will beep and
begin to brew gourmet strength coffee.
C. Bold strength coffee: press Mode button three times,
!
CLEAN
will flash, press SEL
button for Bold coffee then press the START button. The unit will beep and begin to
brew Bold strength coffee.
D. 1-4 CUP Mode: press Mode button four times,
!
CLEAN
will flash, press SEL button
for 1-4 CUP Mode then press the START button. The unit will beep and begin to
brew in 1-4 CUP Mode. * If 12 cups of water are poured into the water tank then
12 cups of coffee will brew. 1-4 Cup Mode is ideally used for making 1-4 cups of
coffee therefore 1-4 cups of water should be poured into the water tank.
E. Clean function: Fill water tank with clean water. Press the Mode button five times,
!
CLEAN
will flash, press SEL button then press the START button. The unit will beep and
begin the cleaning function.
F. Re-set the clock: press Mode button six times until
!
CLEAN
flashes, press SEL
button, the time will flash, follow clock setting method.
G. Automatic start brewing coffee: press and hold AUTO button until PROGRAM
flashes, it will display AM 12:00, follow clock setting method, press AUTO button.
The unit will beep and display current time, the LCD will display TIMER icon.
When the current time reaches the set time, the unit will start the brewing cycle.
8. Press the START button. The Coffee Maker will begin the brew cycle.
NOTE: To interrupt the brewing process at any time, press the START button;
then remove plug from wall outlet.
9. Turn off the unit: press and hold START button
10.
Using the pause and serve feature: If you wish to serve a cup of coffee before the
brew cycle is completed, simply remove carafe from the warming plate. Dripping will
automatically cease. Return the carafe onto the warming plate; dripping will resume.
CAUTION: To prevent injury when utilizing pause and serve feature, replace carafe
within 30 seconds after removing during the brewing process.
11. Upon completion of the brew cycle, wait at least 1 minute until the dripping coffee
from the flow valve into the carafe has stopped. The carafe lid should be kept in
place to facilitate safe serving and help keep coffee at a proper serving temperature.
Tilt the carafe slightly and pour hot coffee very slowly, so that the flow of the brewed
coffee does not exceed the width of the spout.
12. Press and hold the START button to turn the Coffee Maker OFF when the carafe is
empty or when unit is not in use.
PAUSE AND SErvE
1. After approximately 2 cups of coffee have been brewed, the carafe may be slowly
removed and the coffee will stop dripping.
2. The flow valve is located on the bottom of the filter holder and is activated when
the carafe is removed. (See Figure 1.) This design makes it possible for you to
remove the carafe and pour a cup of coffee before the entire carafe is brewed.
IMPORTANT: When replacing the filter holder, the flow valve must be properly
inserted into the front hole of the machine, so that it can be seen as it sits on
the top of the carafe lid. (See Figure 1.)